From: Chirag Patel (chipatel@xxxxxxxxx)
Date: Fri Apr 21 2000 - 12:30:33 GMT-3
Stanley,
You can put secondary network on r2 for 2222 with encap sap. you will not be
able to run eigrp over secondary network so you will need to run rip.
Chirag
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Stanley Seow
Sent: Friday, April 21, 2000 9:55 AM
To: CCIELAB
Subject: IPX Questions
I bump into something that I really stuck at...
I tried a few things, pls comment...
I've 3 router on ethernet segment and I need to need to use 2 network on the
LAN segment and have
full ipx routing table routing ...
R1 - ipx network 1111
R2 - ipx network 1111
R3 - ipx network 2222
I use the default encap for the 1111 network and uses sap for 2222
network...
The LAN runs ipx eigrp
How do I get the 2222 to see 1111 and all other IPX networks and vice
versa...
I came out with an idea of tunneling gre between R2 and R3 running IPX RIP
between the tunnel over
IP. But this still does not work as I cannot get this to work....
Should I use IPXWAN on the tunnel ??
Or should I use NLSP over the tunnel ?
Stanley
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3