From: Scott F. Robohn (sfr@xxxxxxxx)
Date: Fri Apr 21 2000 - 13:36:42 GMT-3
Kenneth,
Answers below...
Kenneth Kriel wrote:
>
> Ladies and Gentleman,
>
> My mind tells me that question (1) is impossible, but experience has taught
> me not to be so cynical, I hope that someone could answer the following two
> questions :
>
> 1. CLIP on 3600 --> LS1010 --> C5K LANE
> Is it possible to test my CLIP config by doing a ping to the C5K int sc0
> with a PVC (aal5snap) config on the LANE module ? Is there another way ?
The LANE module does not support CLIP. It's a _LANE_
module.
> 2. CLIP on 3600 --> LS1010
> Is there a way to configure CLIP on the LS1010 ? If so how ? any suggestions
> ?
You can create a subinterface on the LS1010 that can serve
as a CLIP client and/or server:
int a2/0/0.10 multipoint
ip addr 192.168.1.1 255.255.255.0
atm arpserver nsap <arpserver-nsap> (or 'atm arpserver
self' if you want this to be the ATMARP server)
atm esi-addr 1010.1010.1010.0a
Assuming the CLIP config on the 3600 is compatible, this
should work. No IRB or BVI's necessary :)
You could then route from your CLIP network to the ELAN that
has a LEC on the LANE module.
HTH,
Scott
>
> I am trying to test and verify my CLIP config on the 3600 but have nothing
> to ping.
>
> Ken
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:15 GMT-3