From: David L Stewart (D.Stewart@xxxxxxxxxxxxxxx)
Date: Thu Apr 20 2000 - 11:15:17 GMT-3
The most probable problem is that you did not do the "no
exec" on the tty lines. When the execs start chatting,
you will get refused since the 2509 will think there is
a connection coming in.
It looks like you are doing everything correctly to me.
Also, everyone overlooks the "w" and "disc" commands and
use "who" and "cle line". The "w" and "disc" are specifically
for managing multiple sessions and are the correct ones to use.
"w" is the same as "sh sess", not a short cut for "who".
Dave
- - - - -
At 09:58 PM 4/19/00, Goh, Winston wrote:
>Hi,
>i am doing reverse telnet from 2509 with connection to 8 other routers. My
>problem is after 3 connections, i cannot access other routers via reverse
>telnet. This what i did :
> From 2509 :
>#telnet 200.200.200.1 2001
>...access the router, then ctrl-shift-6, then 'x'.
>#disconnect 1
>repeat the process, but after the 3 connection, problem popped in. Error
>message : Remote host refused connection.
>Is anyone has similiar experience ? cheers
>winston
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3