From: Earl Aboytes (earl@xxxxxxxxxxxx)
Date: Thu Apr 20 2000 - 02:53:13 GMT-3
Well, I thought the same as you do. Look at the documentation. It clearly spe
cifies that the summary address command is used when injecting routes into ospf
and not the other way around. The ip ospf network command on a loopback is a
n interesting idea. I had not heard that one before. Anyone else have thought
s on this?
Earl
At 04:23 AM 4/19/00 -0700, Justin van Schaik wrote:
>OSPF won't advertise loopbacks with subnets unless you configure
>your loopback interface with the "ip ospf network
>point-to-point" command, which will force it to treat the
>loopback as another network.
>
>On the ASBR, you should be able to do a "summary-address"
>command to redefine the loopback addresses along classful
>boundaries.
>
>Somebody correct me if I'm wrong?
>
>- Justin
>
>
>
>--- Earl Aboytes <earl@linkline.com> wrote:
> > How do I get my loopbacks from my ospf domain into my IGRP
> > domain? I have already tried "summary-address" at my ASBR and
> > that did not work. I tried an "area range" command at my ABR
> > and that did not work. Is my only alternative to use a
> > default-network command? Which, by the way, does work.
> > June 12th in San Jose. Anyone else?
> > Earl
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3