From: Goh, Winston (winston.goh@xxxxxxxxxxxxx)
Date: Wed Apr 19 2000 - 09:41:29 GMT-3
hi,
loopback interface is advertised as stub host.
cheers
winston
-----Original Message-----
From: Justin van Schaik [mailto:jagvans@yahoo.com]
Sent: Wednesday, April 19, 2000 7:23 PM
To: Earl Aboytes; ccielab@groupstudy.com
Subject: Re: VLSM into FLSM
OSPF won't advertise loopbacks with subnets unless you configure
your loopback interface with the "ip ospf network
point-to-point" command, which will force it to treat the
loopback as another network.
On the ASBR, you should be able to do a "summary-address"
command to redefine the loopback addresses along classful
boundaries.
Somebody correct me if I'm wrong?
- Justin
--- Earl Aboytes <earl@linkline.com> wrote:
> How do I get my loopbacks from my ospf domain into my IGRP
> domain? I have already tried "summary-address" at my ASBR and
> that did not work. I tried an "area range" command at my ABR
> and that did not work. Is my only alternative to use a
> default-network command? Which, by the way, does work.
> June 12th in San Jose. Anyone else?
> Earl
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3