From: Li Chaoyong (hughcyli@xxxxxxxxxxxxxxxxx)
Date: Sat Apr 15 2000 - 17:14:28 GMT-3
Thank Clifton,
But I want to know how to configure DLSW peer to deny other traffic
except NETBIOS.
Li
----- Original Message -----
From: "Clifton Stewart" <cliftonlstewart@home.com>
To: "Li Chaoyong" <hughcyli@holybridge.com.cn>; <ccielab@groupstudy.com>
Sent: Saturday, April 15, 2000 11:26 PM
Subject: LAT ...
> Li,
>
> You basically have to enable lat on the interfaces that will
> participate in LAT.
> R1
> interface serial 0
> lat enabled
> !
> lat service LAT_R1 enabled
>
> R2
> Specify one router to provide lat services and give it a tag -or- name.
> interface serial 0
> !
> lat service LAT_R2 enabled
>
> * At this point LAT is technically configured, what you are missing are
> the following items...
>
> 1. Performing the LAT translation
> 2. Specifying passwords to be used during LAT session
>
> Below is a URL from Cisco's CCO if you want I can post entire configs
> later.
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios100/ptcgcr/35783
.htm#xtocid189190
>
> Clifton Stewart-CCNA, CCIE Candidate
>
> P.S. You previously posted a question regarding blocking NetBIOS traffic
> try using 0xF0F0 or like Chi stated just reverse the netbios enabling
> out of the config.
>
> Li Chaoyong wrote:
> >
> > Do you have an example.?
> >
> > ----- Original Message -----
> > From: <clou@ebnetworks.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Friday, April 14, 2000 10:48 PM
> > Subject: Re: LAT ...
> >
> > >
> > > I agree with Art, it won't take long for you to learn it.
> > > My recommendation is spend one hour study it and another
> > > hour practice in the lab - then, you sould be good to go.
> > >
> > > The only thing I refuse to learn and practice during my
> > > preparation is Banyan Vines.
> > >
> > > Chi
> > > CCIE# 5795
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:14 GMT-3