From: David H. Brown (DHBrown@xxxxxxxxxxxx)
Date: Sat Apr 08 2000 - 23:07:07 GMT-3
If this helps, I run a 1604 with 56K CSU/DSU WIC to a Cray MultiRate CSU/DSU
using a black Cisco roll-over cable. Works great!
David
(Lab RTP 6/15)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brooke, Scott
Sent: Saturday, April 08, 2000 6:26 PM
To: Ccielab Mailing List (E-mail)
Subject: back to back DSU's
I'm trying to use a t1 crossover cable between two routers I have in the lab
for a few days. One router is a 3661 with the dual channelized t1 card.
The other is a 1750 with a t1 wic. I get carrier detect but I can't get
line protocol to come up. Because of the carrier detect I'm pretty sure the
crossover is right. Can anyone make suggestions about how to get this
working? Is the channelized interface a problem? Thanks!
Scott Brooke
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:13 GMT-3