From: Scott F. Robohn (sfr@xxxxxxxx)
Date: Sat Apr 08 2000 - 01:37:31 GMT-3
Just a couple of thoughts on this:
(1) It seems like this has been hashed over several times in
the past few months. Please check the archives.
(2) Having spent the bulk of this Friday afternoon setting
up for the CATM I'm teaching next week, I can say that both
the Cisco labs and Chesapeake's labs do not have students
doing back-to-back ATM connections between routers; we have
LS1010s in the classroom. The back-to-back router config
with 'atm clock internal' is just for lab purposes, but not
for real implementation, just like back-to-back serial.
Just out of curiousity, can anyone say who is teaching the
CATM labs today with back-to-back router configs?
(3) I've been thinking about the ATM switch issue, and just
about any less expensive ATM switch that can handle SVCs
would meet your need for lab prep purposes. There are a few
choices out there that are worth investigating...
Scott
"Rahmlow, Howard F." wrote:
>
> Ardian is right, If you take the Cisco ATM class, most of the labs are done
> back to back. Once you have the idea down back to back, you have most of
> it.
> Howard
>
> -----Original Message-----
> From: adrian smith [mailto:adrian36@hotmail.com]
> Sent: Friday, April 07, 2000 11:20 AM
> To: ccieorbust@ns1.networkease.com; ccielab@groupstudy.com
> Cc: stanley_seow@techno-craft.com.sg
> Subject: Re: ATM lab Practice
>
> actually you can do a back to back ATM configuration, but it will be limited
>
> in scope. however, it may be good enough for preparation for the lab exam.
>
> >From: Rob Ehlers <ccieorbust@ns1.networkease.com>
> >Reply-To: Rob Ehlers <ccieorbust@ns1.networkease.com>
> >To: CCIELAB <ccielab@groupstudy.com>
> >CC: Stanley Seow <stanley_seow@techno-craft.com.sg>
> >Subject: Re: ATM lab Practice
> >Date: Fri, 7 Apr 2000 07:59:12 -0700 (MST)
> >
> >No, you need an ATM switch... if you can find a deal on a LS100, they work
> >fine as well.
> >
> >--
> >Rob Ehlers, CCIE #5769
> >rehlers@newsguy.com
> >
> >On Fri, 7 Apr 2000, Stanley Seow wrote:
> >
> > > Hi all,
> > >
> > > I've only a 7513 with a FE and a few ATM interfaces on them...
> > > Any idea how I can practise my ATM configuration / troubleshooting ??
> > >
> > > If I have another router with ATM interface... can I like simulate back
> >to
> > > bac ATM without a LS1010 in the middle ?
> > >
> > > Thanks
> > >
> > > Stanley
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:13 GMT-3