From: Sachin Sathaye (sachin_sathaye@xxxxxxxxxxx)
Date: Tue Mar 28 2000 - 20:03:40 GMT-3
1. The MSFC has console on the daughter card. If you remove the Sup module
you will see the console port on the motherboard on you right hand side.
There are two console ports. The MSFC console port is the rightmost. Its
7200 based router so you can follow the same steps.
OR
2. You can give "Switch Console" command on the switch prompt. That will
switch the main console from Switch to router. Then even if you reboot the
switch, it will directly go to the router prompt, no need to do session. To
switch back to Switch prompt type ^C ^C ^C .
-Sachin
----- Original Message -----
From: Bill Dellamar <wdellamar@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, March 28, 2000 12:13 PM
Subject: password
> I can't seem to find any information on password
> recovery for a 6500 with an MSFC card. I am trying to
> break into the MSFC card as a test. It doesn't have a
> console port since it is a daughter card on the
> Supervisor and the only access is "session 15". Does
> anyone know how to do password recovery on a 6500
> MSFC?
> Thanks,
> Bill
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:07 GMT-3