From: Gregory Schwimer (schwim@xxxxxxxxxxxxxxx)
Date: Thu Mar 16 2000 - 00:43:53 GMT-3
x25 routing enables VC switching. Check this link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_c
/wcx25.htm
----- Original Message -----
From: <Ben_J_Durand@tivoli.com>
To: <rodrigo.kazuo@equant.com>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, March 15, 2000 6:59 PM
Subject: Re: X25-- Back to Back
>
>
> Can a router be used as an X.25 switch, sort'of the equivalent of
frame-relay
> switching, with no IP addresses involved on the switching router, just
x.25
> switching?
>
> If so, can someone post an example for the switching router?
>
> Thanks :)
>
> - Ben
>
>
>
>
>
> rodrigo.kazuo@equant.com on 03/13/2000 08:08:50 AM
>
> Please respond to rodrigo.kazuo@equant.com
>
> To: ccielab@groupstudy.com
> cc: (bcc: Ben J Durand/Tivoli Systems)
> Subject: Re: X25-- Back to Back
>
>
>
>
>
> Try this... should work..
>
> R1:
> int s0
> encapsulation x25 dce
> clock rate 64000
> ip add 1.1.1.1 255.255.255.0
> x25 address 1111111
> x25 map ip 1.1.1.2 2222222 broadcast
>
> R2:
> int s0
> encapsulation x25
> ip add 1.1.1.2 255.255.255.0
> x25 address 2222222
> x25 map ip 1.1.1.1 1111111 broadcast
>
> Brgds.
>
>
>
>
>
> Khurram Khani <ajmal@emirates.net.ae> on 03/11/2000 10:28:30 PM
>
> Please respond to Khurram Khani <ajmal@emirates.net.ae>
>
> To: ccielab@groupstudy.com
> cc: (bcc: Rodrigo Kazuo/Brazil/AMERICAS/Equant)
>
> Subject: X25-- Back to Back
>
>
>
> Hello.
>
> Can any one please send me config to connect two Routers back to
> back using X25.
>
> I configured X25 successfully using a X25 Switch but when I am using
> same config for back to back connection , its not pinging
>
> plz send me a sample config
>
> thanks
> Khurram
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:05 GMT-3