From: Ben_J_Durand@xxxxxxxxxx
Date: Wed Mar 15 2000 - 22:59:18 GMT-3
Can a router be used as an X.25 switch, sort'of the equivalent of frame-relay
switching, with no IP addresses involved on the switching router, just x.25
switching?
If so, can someone post an example for the switching router?
Thanks :)
- Ben
rodrigo.kazuo@equant.com on 03/13/2000 08:08:50 AM
Please respond to rodrigo.kazuo@equant.com
To: ccielab@groupstudy.com
cc: (bcc: Ben J Durand/Tivoli Systems)
Subject: Re: X25-- Back to Back
Try this... should work..
R1:
int s0
encapsulation x25 dce
clock rate 64000
ip add 1.1.1.1 255.255.255.0
x25 address 1111111
x25 map ip 1.1.1.2 2222222 broadcast
R2:
int s0
encapsulation x25
ip add 1.1.1.2 255.255.255.0
x25 address 2222222
x25 map ip 1.1.1.1 1111111 broadcast
Brgds.
Khurram Khani <ajmal@emirates.net.ae> on 03/11/2000 10:28:30 PM
Please respond to Khurram Khani <ajmal@emirates.net.ae>
To: ccielab@groupstudy.com
cc: (bcc: Rodrigo Kazuo/Brazil/AMERICAS/Equant)
Subject: X25-- Back to Back
Hello.
Can any one please send me config to connect two Routers back to
back using X25.
I configured X25 successfully using a X25 Switch but when I am using
same config for back to back connection , its not pinging
plz send me a sample config
thanks
Khurram
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:05 GMT-3