From: GRIZZUTI Javier (jgrizzut@xxxxxxxxxxxxxx)
Date: Thu Mar 02 2000 - 14:47:20 GMT-3
Hey all
I have this problem with appletalk access list , they are not working or I'm
confuguring them wrong
I have R3 connected to R4 and I want network 750 to be out of R4 routing
table , here are the configurations
R4
interface Serial1
ip address 132.1.32.34 255.255.255.240
encapsulation frame-relay
ip ospf network point-to-multipoint
no ip mroute-cache
appletalk address 100.4
appletalk zone FRAME
appletalk protocol eigrp
no appletalk protocol rtmp
appletalk distribute-list 601 in
no appletalk eigrp-splithorizon
no fair-queue
///////
access-list 601 deny network 750
access-list 601 permit other-access
R4#sh app route
Codes: R - RTMP derived, E - EIGRP derived, C - connected, A - AURP
S - static P - proxy
8 routes in internet
The first zone listed for each entry is its default (primary) zone.
C Net 100 directly connected, Serial1, zone FRAME
E Net 200 [1/G] via 100.3, 7678 sec, Serial1, zone TUNEL
E Net 300-300 [1/G] via 100.3, 7678 sec, Serial1, zone R3R6
C Net 400-400 directly connected, Virtual-TokenRing0, zone Ring2
E Net 500 [2/G] via 100.3, 7678 sec, Serial1, zone R2R5
E Net 600-600 [2/G] via 100.3, 7679 sec, Serial1, zone Ring1
E Net 750 [1/G] via 100.3, 315 sec, Serial1, zone ISDN
E Net 800-800 [1/G] via 100.1, 7679 sec, Serial1, zone BACK
R4#
R3
interface Serial0.1 multipoint
ip address 132.1.32.33 255.255.255.240
ip ospf network point-to-multipoint
appletalk address 100.3
appletalk zone FRAME
appletalk protocol eigrp
no appletalk protocol rtmp
appletalk zip-reply-filter 602 <---------------- This doesn't work also
frame-relay interface-dlci 403
access-list 602 deny zone ISDN:20
access-list 602 permit additional-zones
access-list 602 permit other-access
R3#sh app route
Codes: R - RTMP derived, E - EIGRP derived, C - connected, A - AURP
S - static P - proxy
8 routes in internet
The first zone listed for each entry is its default (primary) zone.
C Net 100 directly connected, Serial0.1, zone FRAME
C Net 200 directly connected, Tunnel0, zone TUNEL
C Net 300-300 directly connected, Ethernet0, zone R3R6
E Net 400-400 [1/G] via 100.4, 7790 sec, Serial0.1, zone Ring2
R Net 500 [1/G] via 200.2, 2 sec, Tunnel0, zone R2R5
R Net 600-600 [1/G] via 200.2, 2 sec, Tunnel0, zone Ring1
C Net 750 directly connected, BRI0, zone ISDN
E Net 800-800 [2/G] via 100.4, 7790 sec, Serial0.1, zone BACK
R3#
I will apreciate any help.
Thanks
> ----------------------------------------------------------
> Ing. Javier Grizzuti- Systems Engineer
> Servicios de Ingeniería de Soporte
> SoftNet S.A. - Perú 327 1er Piso "A" (1067)
> Buenos Aires - ARGENTINA
> Phone: (54-1) 4343-4990 - Ext. 237
> Fax: (54-1) 4343-9132
> mailto:jgrizzut@softnet.com.ar
> http://www.softnet.com.ar
> ---------------------------------------------------------
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:03 GMT-3