From: ejobson (ejobson@xxxxxxxxxxx)
Date: Thu Mar 02 2000 - 10:56:03 GMT-3
I had a similar problem to this with secondary addressing with EIGRP. By
summarising using the 'ip summary-address eigrp 1 10.45.1.0
255.255.255.192' on ethernet 0 allowed a common route into the eigrp area
summarising subnets 14,22,30,38,46&54 into one update.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jason T. Rohm
Sent: Wednesday, March 01, 2000 4:47 PM
To: Ccielab (E-mail)
Subject: OSPF and Secondary Addresses
I think I know the answer, but I am hoping that someone can confirm this
for me.
I have four routers on an ethernet segment. They are all part of area 0.
The fourth router refuses to form adjacencies with the other three. This
fourth router has an IP address that is from a different range, but has a
secondary address that is on the same subnet as the other three.
If I debug ip ospf events, I get a message that the hello packets are from
the wrong address.
Is this normal? Is there a way to make the fourth OSPF router join the area
w/out swapping the primary and secondary addresses?
-Jason T. Rohm
jtrohm@athenet.net
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:23:03 GMT-3