From: rodrigo.kazuo@xxxxxxxxxx
Date: Tue Feb 22 2000 - 08:56:46 GMT-3
Itīs possible to config a virtual token ring interface in IOS newer than
11.3. This virtual interface looks like a physical tr interface...
Rgds
"Earl Aboytes" <earl@linkline.com> on 02/22/2000 04:18:40 AM
Please respond to "Earl Aboytes" <earl@linkline.com>
To: ccielab@groupstudy.com, josh@mstates.com, simon.baxter@citicorp.com
cc: (bcc: Rodrigo Kazuo/Brazil/AMERICAS/Equant)
Subject: RE: TR back to back
Didn't someone on the list say that you could configure a virtual token ring
interface? I think it was in later IOS releases and the command was 'interface
virtual-tokenring'....I think. Anyone remember this e-mail? I looked for it
but could not find it.
Earl
---------- Original Message ----------------------------------
From: simon.baxter@citicorp.com
Reply-To: simon.baxter@citicorp.com
Date: Mon, 21 Feb 2000 16:58:28 +0000
>Funny how if you stick around long enough you see the same things.
>
>Have a look at the attached mail-trail Josh.
>
>Basically, no. You need a mau unless you have one of thes 7500 cards.
>
>-----Original Message-----
>From: josh [mailto:josh@mstates.com]
>Sent: Monday, February 21, 2000 4:30 PM
>To: ccielab
>Cc: josh
>Subject: TR back to back
>
>
>Does anyone on the list have any idea how and if possible to connect 2
>Cisco
>TR interfaces back to back without using a MAU? Is it possible to build
>a
>roll cable of some sort? Thanks.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:54 GMT-3