From: Richardson, Cheryl (cheryl.richardson@xxxxxxxx)
Date: Sun Jan 23 2000 - 21:34:12 GMT-3
Ben,
Although I thought they were inserted by default, you would typically
use..
atm pvc 1 0 5 qsaal
atm pvc 2 0 16 ilmi
Yours shows qsaal on the well-known ilmi pvc.
Cheryl Richardson
> -----Original Message-----
> From: Ben Rife [SMTP:brife@bignet.net]
> Sent: Sunday, January 23, 2000 6:03 PM
> To: ccielab@groupstudy.com
> Subject: ATM Question
>
> I have configured my CAT 5500 MM OC-3 Dual-Phy ATM Blade as follows:
>
> hostname ATM
> !
> interface Ethernet0
> !
> interface ATM0
> atm preferred phy A
> atm pvc 2 0 16 qsaal
> atm esi-address 333333333333.00
> !
> interface ATM0.1 multipoint
> lane client ethernet 1 elan1
> !
> line con 0
> line vty 0 4
> no login
> !
> end
>
>
> I have another router acting as the LES-BUS, LECS, LEC, with the LANE
> Database, etc. It can route traffic just fine to another router via my ASP
> in the CAT 5500. What am I missing on the ATM blade to get my router
> connected to the switch via ethernet to communicate to the others
> configured with ATM NPM's ?
>
> Does this make any sense?
>
> Thanks,
>
> Ben
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3