From: naushad prasla (naushad.prasla@xxxxxxxxx)
Date: Sun Jan 23 2000 - 14:14:17 GMT-3
Denton,
Yes, you do not necessarily need atm rate-queue to make a basic
configuration work. VCD 5 is local to the Router and must match in your
map-list statement. That's how map-list ip address is mapped to the PVC.
VCI 10 is local to your Router's connection to the LS1010 interface. Within
the LS1010, VCI 10 must be mapped to another atm interface.
It's really that easy.
Naushad Prasla
Denton Bobeldyk wrote:
> Question on ATM PVC's.
>
> It would appear that according to the CD they are quite simple to
> create. According to the example in the doc you have:
>
> interface atm 0
> ip address 1.1.1.1 255.255.255.0
> atm rate-queue 1 100
> atm pvc 5 0 10 aal5snap
> ip route-cache cbus
> map-group atm
> !
> map-list atm
> ip 1.1.1.5 atm-vc 5 broadcast
>
> I'm assuming the 'atm rate-queue' command isn't completely necessary.
> Can I also assume that if this were the answer to a question, the
> question would have
> to provide what VCI (10) to use and what IP address is on the other side
> of that so I could
> create my map-list stmt?
>
> Also: Is the VCD (5) local only to that router? Does it only have
> significance to this config
> only?
>
> Any light would be most appreciated.
>
> -Denny
>
> --
> -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
> Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
> Email: denny@kentwoodps.org
> Phone: 616-530-9196
>
> Master CNE - Connectivity
> Cisco Certified Design Associate
> Cisco Certified Network Associate
> Cisco Certified Systems Instructor
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3