From: BERNICO MICHAEL (MBERNICO@xxxxxxxxxxxxxxxxxxxxx)
Date: Thu Jan 20 2000 - 12:51:09 GMT-3
As an intresting side note to this, if you configure static ICANREACH for
DLSW you have to remember that the mac translation isn't done. i.e if you
have a token ring on router 1 and an ethernet on router 2 with dlsw between
them and you want to put a static ICANREACH in on router 2 for a ethernet
node you should convert the mac to the mac that the token ring would see.
this is because dlsw transmits all macs in token ring format and expects its
static ICANREACH to be in that format.
Mike Bernico
LincOn Network Operations Center
Illinois State Board of Education
(217) 782-4313
-----Original Message-----
From: Lee, Phillip (CAP, ITS, CA) [mailto:Phillip.Lee@gects.ge.com]
Sent: Thursday, January 20, 2000 8:22 AM
To: 'wang xihan'; ccielab@groupstudy.com
Subject: RE: Dlsw help
You don't need SR/TLB since translation is done automatically between
routers. SRB on RA and TB on RB.
-----Original Message-----
From: wang xihan [mailto:wangxh@nts.net.edu.cn]
Sent: 20-Jan-00 2:17 AM
To: ccielab@groupstudy.com
Subject: Dlsw help
Hi all
i have a question with dlsw
how can i config dlsw to connect this , if i want to use slsw to connect
tokenring and ethernet, should i config SR/TLB ? if should , in which router
and how?
map
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3