From: Jeff Blum (jblum99@xxxxxxxxx)
Date: Tue Jan 18 2000 - 13:41:09 GMT-3
Chad is correct. NLSP is a link-state protocol like
OSPF. Only at redistribution points between areas or
protocols can you filter.
--- Chad Marsh <chad@wa.net> wrote:
> From what I understand, and the limited experience I
> have messing with
> NLSP, you can only filter routes at either a
> distribution point between
> another protocol (or static, connected) and NLSP, or
> you can filter
> routes between NLSP areas, if you have multiple
> areas setup. Once NLSP
> learns a route, it doesn't want to let go of it.
>
> Chad Marsh
> CCIE #5185
>
> > wang xihan wrote:
> >
> > hi all
> > could sb tell me that how can i do network
> filter with nlsp in ipx ,
> > i try to use distribute list and network filter
> command , but this are
> > only work with rip or eigrp , how can i filter
> nlsp network ?
> > thanks a lot
> > xihan Wang
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3