From: Mike McSpedon (Mike@xxxxxxxx)
Date: Mon Jan 17 2000 - 21:10:05 GMT-3
Denny,
The "Configuring Source Route Bridging" doc has some really useful info.
It's not a comprehensive list of LSAPs; don't recall ever seeing one on the
CD.... This link has some good examples of filtering AT, IPX, SNA, NETBIOS
by LSAP. Also, note the examples of access expressions, which, as you
probably know, are important if you need to filter on complex criteria,
like "Pass the frame if it is NetBIOS, or if it is an SNA frame destined to
address 0110.2222.3333."
http://127.0.0.1:8080/cc/td/doc/product/software/ios120/12cgcr/ibm_c/bcprt1/
bcsrb.htm#xtocid1616288
Hope this helps.
-Mike
At 03:58 PM 1/17/00 -0500, Denton Bobeldyk wrote:
>Clarification:
>I'm looking to use the dlsw remote-peer command with an lsap
>filter. I want to allow only SNA traffic from one peer to another
>and would like to know where on the CD I could find this type
>code information.. Thank You.
>
>-Denny
>
>--
>-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
>Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
>Email: denny@kentwoodps.org
>Phone: 616-530-9196
>
>Master CNE - Connectivity
>Cisco Certified Design Associate
>Cisco Certified Network Associate
>Cisco Certified Systems Instructor
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:45 GMT-3