From: Manjeet Chawla (mchawla@xxxxxxxxxx)
Date: Sat Jan 08 2000 - 00:57:38 GMT-3
Good question !
My normal connectivity to destination network is via default route to
internet. So the destination network network, under normal circumstances is
not in the routing table. When the internet connection went down, ISDN
kicked in and OSPF sent all routes from all the branch router to the caller
and provided continued connectivity. When internet came back up, these route
needs to go away.
Rick Burts wrote:
> Why would you want to clear them ? They were installed because the
> neighbor advertised that they could be reached. If that changes the
> neighbor should send an LSA changing their state. If you want them
> to become unavailable, go the the neighbor and make them unavailable,
> the router will open the demand circuit and send an update. Why do
> you want to get in and clear them ?
>
> Rick
>
> On Thu, 6 Jan 2000, Manjeet Chawla wrote:
>
> > I configured OSPF demand circuit and all worked fine and remote routes
> > were installed into the routing table. Hours later those routes are
> > still in the routing table. How do I clear those OSPF route from the
> > routing table.
> >
> > I have tried following:
> >
> > Clear ip route *
> > clear ip route <ip add>
> > Shut down BRI
> > Cannot shut down the Dialer 0 as it is the lead in the rotary group.
> >
> > Any ideas ?
> >
> > -Manjeet
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:43 GMT-3