From: Denton Bobeldyk (denny@xxxxxxxxxxxxxx)
Date: Wed Dec 29 1999 - 01:56:46 GMT-3
I'm trying to use the 'host-netbios-out' option for the
dlsw remote-peer command and am unable to get this to work properly.
Has anyone got a sample config that works?
My setup is R1-R2-R3-R4
I have two laptops - one hanging off of the ethernet of R1 and the other
hanging off the ethernet of R4. For some reason I can still see the
NetBIOS
host through Windows even though I'm trying to deny all Netbios names.
(Or at
least that's what I think I'm doing). (I have tried rebooting the
clients, but they can still
find and access files on the other client.)
When I use the dmac-output-list command I can block it by mac address,
just can't
get the netbios name thing to work....
Any help would be apprecited, configs are below:
hostname R4
!
netbios access-list host NBACL deny *
!
ip subnet-zero
no ip domain-lookup
dlsw local-peer peer-id 10.4.0.2
dlsw bgroup-list 1 bgroups 2 1
dlsw remote-peer 1 tcp 10.2.0.1 host-netbios-out NBACL
dlsw bridge-group 1
!
interface Ethernet0
no ip address
no ip directed-broadcast
bridge-group 2
!
interface Ethernet1
no ip address
no ip directed-broadcast
bridge-group 1
!
hostname R1
!
!
ip subnet-zero
no ip domain-lookup
dlsw local-peer peer-id 10.2.0.1
dlsw remote-peer 0 tcp 10.4.0.2
dlsw bridge-group 1
!
interface Ethernet0
no ip address
no ip directed-broadcast
bridge-group 1
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
Email: denny@kentwoodps.org
Phone: 616-530-9196
Master CNE - Connectivity
Cisco Certified Design Associate
Cisco Certified Network Associate
Cisco Certified Systems Instructor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:22:00 GMT-3