From: brian.m.edwards@xxxxxxxxx
Date: Wed Dec 08 1999 - 11:52:18 GMT-3
All-In-One CCIE Lab Study Guide
by Stephen Hutnik, Michael Satterlee
http://www.amazon.com/exec/obidos/ASIN/0071351086/o/qid=944664470/sr=8-1/102-50
79574-3728038
This book is definitely not "All-in-one", but it has a great collection of labs
scenarios. None of the labs are CCIE caliber, but they get you on tract to tin
kering with various functions.
Overall the Caslow book is the best I've read, but it lacks sample labs.
> -----Original Message-----
> From: Brett Summerville [SMTP:phreeze@erols.com]
> Sent: Wednesday, December 08, 1999 8:45 AM
> To: brian.m.edwards@exxon.com
> Subject: Re: Frame Relay
>
> What is this all-in-one book you speak of?
>
> Thanks, Brett
>
> -----Original Message-----
> From: brian.m.edwards@exxon.com <brian.m.edwards@exxon.com>
> To: ccielab@groupstudy.com <ccielab@groupstudy.com>
> Date: Tuesday, December 07, 1999 5:48 PM
> Subject: RE: Frame Relay
>
>
> >Watch out there is a mistake in the All-in-one book. In Lab #14, they lead
> you down a path to self-destruction. They have you use IARP to resolve the
> IP address of the hub and then configure a map statement for the other
> spoke. Voila, you have full connectivity.
> >
> >The problem is that IARP is now disabled, so if you do a shut/no shut on
> the serial interface of the spoke you will lose connectivity to the hub. You
> must configure a map statement for the hub.
> >
> >At the CCIE lab, save some time at the end of your lab to reload all your
> routers and verify that everything still works.
> >
> >I think the Caslow and the All-in-one book work well together. Caslow has
> better explanations of the various gotchas and all-in-one has more example
> labs.
> >
> >All-in-one has a good description of Frame Relay QOS settings.
> >
> >> -----Original Message-----
> >> From: Clifton L. Stewart [SMTP:cliftonlstewart@home.com]
> >> Sent: Tuesday, December 07, 1999 1:39 PM
> >> To: ccielab@groupstudy.com
> >> Subject: Frame Relay
> >>
> >> The All-in-One CCIE Lab Study Guide, chapter 4 is dedicated to Frame
> >> Relay labs. Remember you will always have one router as a switch(DTE).
> >> The DCE side of the cables will attach to these, specify lmi-type
> >> (default is cisco). Inverse arp will automatically map DLCI's, if you
> >> turn off this feature you will need to map and ip address to the
> >> destination.
> >>
> >>
> >> Chapter 4 of "Bridges, Routers, and Switches" also handle Frame Relay
> >> using three routers in a hub and spoke environment. Good luck with your
> >> studies.
> >>
> >> Cliff Stewart-CCNA, CCIE Candidate
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3