From: Brad Hedlund (BHedlund@xxxxxxxxxxxxxxxxxxx)
Date: Tue Dec 07 1999 - 18:20:01 GMT-3
No Problem Scott! At least you know now for you next test.
It saves time to let Inverse ARP do the work for you!
777 on your test!
-Brad
>
> Brad/all,
>
> Yup, Clearly I was wrong:
>
> r4(config-subif)#frame-relay inv
> r4(config-subif)#frame-relay inverse-arp ?
> <cr>
> apollo Apollo Domain
> appletalk AppleTalk
> bridge Bridging
> decnet DECnet
> ip IP
> ipx Novell IPX
> qllc qllc protocol
> vines Banyan VINES
> xns Xerox Network Services
>
> I guess this would indicate Inverse ARP supports protocols
> other than IP.
>
> I RECANT! Sorry about the mistake.
>
> Scott
>
> Brad Hedlund wrote:
> >
> > >
> > > BTW, Inverse ARP only works for IP.
> > >
> >
> > Scott, I am running 11.2 code and Inverse ARP seems to work
> for non-IP
> > protocols for me...
> >
> > Notice below that the decnet address was dynamically resloved:
> >
> > R5#sh frame map
> > Serial0.1 (up): decnet 1.6 dlci 506(0x1FA,0x7CA0), dynamic,
> > broadcast,, status defined, active
> > Serial0.1 (up): ip 172.168.100.3 dlci 503(0x1F7,0x7C70), dynamic,
> > broadcast,, status defined, active
> > Serial0.1 (up): ip 172.168.100.6 dlci 506(0x1FA,0x7CA0), dynamic,
> > broadcast,, status defined, active
> > Serial0.2 (up): point-to-point dlci, dlci
> 504(0x1F8,0x7C80), broadcast
> > status defined, active
> > R5#
> > R5#
> >
> > -Brad
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3