From: Brad Hedlund (BHedlund@xxxxxxxxxxxxxxxxxxx)
Date: Tue Dec 07 1999 - 17:27:32 GMT-3
>
> BTW, Inverse ARP only works for IP.
>
Scott, I am running 11.2 code and Inverse ARP seems to work for non-IP
protocols for me...
Notice below that the decnet address was dynamically resloved:
R5#sh frame map
Serial0.1 (up): decnet 1.6 dlci 506(0x1FA,0x7CA0), dynamic,
broadcast,, status defined, active
Serial0.1 (up): ip 172.168.100.3 dlci 503(0x1F7,0x7C70), dynamic,
broadcast,, status defined, active
Serial0.1 (up): ip 172.168.100.6 dlci 506(0x1FA,0x7CA0), dynamic,
broadcast,, status defined, active
Serial0.2 (up): point-to-point dlci, dlci 504(0x1F8,0x7C80), broadcast
status defined, active
R5#
R5#
-Brad
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:59 GMT-3