From: Michael Law (htluo@xxxxxxxxx)
Date: Mon Dec 06 1999 - 01:49:28 GMT-3
How do I write the 'dial map' command?
----- Original Message -----
From: "Brian Van Benschoten" <vader@inxpress.net>
To: <ccielab@groupstudy.com>
Sent: Monday, December 06, 1999 12:37 PM
Subject: Re: Null Modem Cable?
> Make sure you use "async mode dedicated" on the aux ports
> ----- Original Message -----
> From: Jay Hennigan <jay@west.net>
> To: Michael Law <htluo@cisco.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Sunday, December 05, 1999 10:25 PM
> Subject: Re: Null Modem Cable?
>
>
> > On Mon, 6 Dec 1999, Michael Law wrote:
> >
> > > Hi, Guys,
> > >
> > > Can I connect two cisco routers via a Null Modem cable? Can I do DDR
> with this?
> > >
> >
> > Yes. If you're using aux ports, a standard Cisco rollover console flat
> > cable should work.
> >
> > I don't see why you couldn't do DDR, but you won't be able to simulate
> > the actual dialing, as the connection will come up when DTR is raised.
> >
> > --
> > Jay Hennigan - Network Administration - jay@west.net
> > NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
> > WestNet: Connecting you to the planet. 805 884-6323
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3