From: Brian Van Benschoten (vader@xxxxxxxxxxxx)
Date: Mon Dec 06 1999 - 01:37:54 GMT-3
Make sure you use "async mode dedicated" on the aux ports
----- Original Message -----
From: Jay Hennigan <jay@west.net>
To: Michael Law <htluo@cisco.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, December 05, 1999 10:25 PM
Subject: Re: Null Modem Cable?
> On Mon, 6 Dec 1999, Michael Law wrote:
>
> > Hi, Guys,
> >
> > Can I connect two cisco routers via a Null Modem cable? Can I do DDR
with this?
> >
>
> Yes. If you're using aux ports, a standard Cisco rollover console flat
> cable should work.
>
> I don't see why you couldn't do DDR, but you won't be able to simulate
> the actual dialing, as the connection will come up when DTR is raised.
>
> --
> Jay Hennigan - Network Administration - jay@west.net
> NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/
> WestNet: Connecting you to the planet. 805 884-6323
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3