From: George Harizanov (georgehar@xxxxxxxxxxx)
Date: Sun Dec 05 1999 - 15:19:54 GMT-3
Stan .. I accidentaly saw it in Caslow's book ... it is a subcommand of set
port.
here it is..
Console> (enable) set port help
Set port commands:
----------------------------------------------------------------------
set port broadcast Set port broadcast traffic limit
set port channel Set port channel (on/off)
set port disable Disable a port
set port duplex Set port transmission type (full/half duplex)
set port enable Enable a port
set port help Show this message
set port level Set port priority level (normal/high)
set port membership Set vlan membership assignment to a port
set port multicast Set port multicast router ------------>>>>>
???????????????
set port name Set port name
set port security Set port security (enable/disable)
set port speed Set port transmission speed (10/100 Mbps)
set port trap Set port up/down trap (enable/disable)
Console> (enable)
----- Original Message -----
From: Stanislav Sinyagin <SSinyagin@mtu.ru>
To: George Harizanov <georgehar@prodigy.net>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, December 05, 1999 7:32 PM
Subject: Re: set port multicast ->cat5000 ???
> George, where did you find it at all ?
>
> George Harizanov <georgehar@prodigy.net> wrote:
> GH> Hi everybody..
>
> GH> Wondering if somebody knows the purpose of "set port multicast"
command for CAT 5000.
> GH> I couldn't find anything about it on the cisco web site.
>
> GH> Thanks.
>
>
>
> --
> Stanislav Sinyagin MTU-Inform, Moscow
> Tel. (+7) (095) 258 7878 Fax (+7) (095) 258 7870
> E-mail: SSinyagin@mtu.ru http://www.mtu.ru
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3