From: Ken (cciecn@xxxxxxxxx)
Date: Mon Dec 06 1999 - 00:22:33 GMT-3
The function is to tell the switch the ip address of
the IGMP router, normally this is not a Cisco router
which can not run CGMP. By CGMP running, Cisco
switches and routers can automatically discover their
mulitcast ability
Ken
--- George Harizanov <georgehar@prodigy.net> wrote:
> Stan .. I accidentaly saw it in Caslow's book ... it
> is a subcommand of set
> port.
> here it is..
>
> Console> (enable) set port help
> Set port commands:
>
----------------------------------------------------------------------
> set port broadcast Set port broadcast traffic
> limit
> set port channel Set port channel (on/off)
> set port disable Disable a port
> set port duplex Set port transmission type
> (full/half duplex)
> set port enable Enable a port
> set port help Show this message
> set port level Set port priority level
> (normal/high)
> set port membership Set vlan membership
> assignment to a port
> set port multicast Set port multicast router
> ------------>>>>>
> ???????????????
> set port name Set port name
> set port security Set port security
> (enable/disable)
> set port speed Set port transmission
> speed (10/100 Mbps)
> set port trap Set port up/down trap
> (enable/disable)
> Console> (enable)
>
>
>
>
> ----- Original Message -----
> From: Stanislav Sinyagin <SSinyagin@mtu.ru>
> To: George Harizanov <georgehar@prodigy.net>
> Cc: <ccielab@groupstudy.com>
> Sent: Sunday, December 05, 1999 7:32 PM
> Subject: Re: set port multicast ->cat5000 ???
>
>
> > George, where did you find it at all ?
> >
> > George Harizanov <georgehar@prodigy.net> wrote:
> > GH> Hi everybody..
> >
> > GH> Wondering if somebody knows the purpose of
> "set port multicast"
> command for CAT 5000.
> > GH> I couldn't find anything about it on the cisco
> web site.
> >
> > GH> Thanks.
> >
> >
> >
> > --
> > Stanislav Sinyagin MTU-Inform, Moscow
> > Tel. (+7) (095) 258 7878 Fax (+7) (095) 258 7870
> > E-mail: SSinyagin@mtu.ru http://www.mtu.ru
> >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3