From: rodrigo.kazuo@xxxxxxxxxx
Date: Wed Dec 01 1999 - 21:30:44 GMT-3
Does anyone know how can I get some sample configurations of this? Ciscoīs
web site has it?! I didnīt found a similar one...
If someone could give me an example or something similar to me, it would b
e
great, because iīve never seen this topology before and Iīve already tried to
configure it in many different ways, with no solution...
Tks and brgds...
"Eddie M. Parra" <eparra@rexallsundown.com> on 12/01/99 07:55:46 PM
To: Rodrigo Kazuo/Brazil/AMERICAS/Equant@Equant, ccielab@groupstudy.com
cc:
Subject: RE: OSPF with ISDN backup
Use a "ip ospf demand-circuit"
-Eddie
-----Original Message-----
From: rodrigo.kazuo@equant.com [mailto:rodrigo.kazuo@equant.com]
Sent: Wednesday, December 01, 1999 5:49 PM
To: ccielab@groupstudy.com
Subject: OSPF with ISDN backup
I have here in my lab the following topology:
BGP --- (R3) ---- (Catalyst) ---- (R5) --- OSPF Area 3
|
R2
- Between R3 and R5 I have an additional ISDN link, and I want to configure
the
ISDN as a backup when topology changes occur in OSPF (for example, if my
link
between cat and R5 fails).
- R3/R2/R5 (except R5īs area 3 interface) are in Area 0
- I have an ip subnet for the isdn link and other subnet for the rest of
interfaces in Area 0
Can anyone try to help me or give me a direction?
OBS: The problem is that I cannot configure static routes or floating
routes...
Tks in advance
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:57 GMT-3