From: Schmitt, Gregory (Gregory.Schmitt@xxxxxxxxxx)
Date: Thu Dec 02 1999 - 10:36:38 GMT-3
Rodrigo,
Here you go:
<<demand circuit example.txt>>
There are items left out, these are not complete configurations. However,
they should get you started with demand circuits.
Cheers,
> Greg Schmitt
> Network Technology Consultant
>
> Next Generation Networks IST
> Network and Systems Integration Services
> Federal Government Territory
COMPAQ Federal LLC
Voice: 410-349-9772
Pager: 800-759-8888 PIN 1232801
Or http://www.skytel.com/Paging/pageme.cgi?pin=1232801,1
> ----------
> From: rodrigo.kazuo@equant.com[SMTP:rodrigo.kazuo@equant.com]
> Reply To: rodrigo.kazuo@equant.com
> Sent: Wednesday, December 01, 1999 7:30 PM
> To: ccielab@groupstudy.com
> Subject: RE: OSPF with ISDN backup
>
>
>
> Does anyone know how can I get some sample configurations of this?
> Ciscoīs
> web site has it?! I didnīt found a similar one...
> If someone could give me an example or something similar to me, it
> would be
> great, because iīve never seen this topology before and Iīve already tried
> to
> configure it in many different ways, with no solution...
>
> Tks and brgds...
>
>
>
>
> "Eddie M. Parra" <eparra@rexallsundown.com> on 12/01/99 07:55:46 PM
>
> To: Rodrigo Kazuo/Brazil/AMERICAS/Equant@Equant, ccielab@groupstudy.com
> cc:
>
> Subject: RE: OSPF with ISDN backup
>
>
>
> Use a "ip ospf demand-circuit"
>
> -Eddie
>
>
> -----Original Message-----
> From: rodrigo.kazuo@equant.com [mailto:rodrigo.kazuo@equant.com]
> Sent: Wednesday, December 01, 1999 5:49 PM
> To: ccielab@groupstudy.com
> Subject: OSPF with ISDN backup
>
>
>
>
>
>
> I have here in my lab the following topology:
>
>
> BGP --- (R3) ---- (Catalyst) ---- (R5) --- OSPF Area 3
> |
> R2
>
>
> - Between R3 and R5 I have an additional ISDN link, and I want to
> configure
> the
> ISDN as a backup when topology changes occur in OSPF (for example, if my
> link
> between cat and R5 fails).
> - R3/R2/R5 (except R5īs area 3 interface) are in Area 0
> - I have an ip subnet for the isdn link and other subnet for the rest of
> interfaces in Area 0
>
> Can anyone try to help me or give me a direction?
>
> OBS: The problem is that I cannot configure static routes or floating
> routes...
>
> Tks in advance
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:58 GMT-3