From: Denton Bobeldyk (denny@xxxxxxxxxxxxxx)
Date: Sat Nov 27 1999 - 14:41:30 GMT-3
If area 2 has a virtual link to area 0, you have to make sure that you have
the area 0 authentication stuff on your 'area 2' router. Because technically
that router is also part of the area 0.
-Denny
Andrew Yourtchenko wrote:
> Hello Vijaykrishna,
>
> Could you throw in the configs ?
>
> with best regards,
> Andrew Yourtchenko
>
> /Systems Engineer
> OCS distribution
> phone. +7-812-324-2870 ext 244
> mailto:andin@ocs.ru
> http://www.ocs.ru/
>
> Friday, November 26, 1999, 10:20:09 PM, you wrote:
>
> V> I am trying to connect the disjoint non-backbone area 2 to the backbone ar
ea 0 via another area 1.
> V> I am running OSPF MD5 on the area 0 and area 2 while no authentication in
area 1.
> V> I have created the virtual link between the ABRs in area 1 but the virtual
link is not forming the adjacency.
> V> I tried enabling MD5 on the VL but same problem.
> V> Also putting the area 1 in MD5 doesn't solve the problem either.
> V> It works when all the authentication is disabled in all areas...
> V> Can anyone help ?
> V> thanks,
> V> Vijay
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:55 GMT-3