From: Muralidhar Devarasetty (dhar_murali@xxxxxxxxxxx)
Date: Tue Nov 09 1999 - 11:57:34 GMT-3
Hi all,
Is there any one working on policy based routing?
I was trying and faced seriuos problems.
R4
|
|
------R1-------R2--------R3-----
| |
| |
|------------------|
This is how I connected.Since R4 can be reachable from R1 thro' R3 and R2 I
wanted to test policy routing for the same.
In R1 I createsd a lo back and set the policy if the packet initiates from
local box it has to go thr' R3 to reach R4.
If the packet starts from e0 it has to go thr' R2.
Ospf is running every where.Withou any policy routing every thing is working
fine.When I enable policy routing first I lost all OSPF routes at R1.
I understand there may be adjacency probs so I passed all the OSPF traffic
to R2 using policsy routing.
Then all OSPF routes comes fine.When I try to do extended ping or trace
route to R4 It is failing no matter what the source (e0 or lo0).But in
routing table the route is still available.The instant I remove the policy
routing every thing is working fine.
I applied ip policy to e0 and ip local policsy and expecting this to work.
Am I missing some thing????
Any input will be appriciated.
Murali
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:55 GMT-3