From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Mon Oct 18 1999 - 09:50:52 GMT-3
I connect up a few win95 pc, enable netbuei and do file sharing to test.
Eng Wee
At 14:07 17/10/99 -0700, Muralidhar Devarasetty wrote:
>How do U guys check whether DLSW config is working fine or not without
>generating netbios traffic.I normally access my lab thr dialup and not sure
>how to check the dlsw configs.
>Any idea will be appriciated..
>Mk
>
>
>----Original Message Follows----
>From: ymadon@comtech.com.au
>Reply-To: ymadon@comtech.com.au
>To: Jason Chen <jchenk@online.sh.cn>
>CC: "Ganich, Mike (M.J.)" <mganich@ford.com>, ccielab@groupstudy.com
>Subject: Re: dlsw
>Date: Sat, 9 Oct 1999 00:57:31 +1000
>
>
>
>
> does the "SHOW DLSW REACHABILITY COMMAND " help in this case
>
>
>
>
>
>Jason Chen <jchenk@online.sh.cn> on 08/10/99 10:03:08 PM
>
>Please respond to Jason Chen <jchenk@online.sh.cn>
>
>To: "Ganich, Mike (M.J.)" <mganich@ford.com>
>cc: ccielab@groupstudy.com
>
>Subject: Re: dlsw
>
>
>
>
>Dear Mike,
>
>I'm involving in dlsw. Maybe we can help each other. My schedule of lab test
>is
>Dec 14&15th. when about u?
>
>Regard to dlsw, I have another problem about dlsw. There are two routers as
>dlsw
>peers, and each one has an Ethernet connected(doesn't have tokenring
>interface),
>if an Ethernet node MAC 0080c8.123456 want send a netbios packet to another
>side
>,what's the MAC address of the node in dlsw packet? If I want to filter the
>MAC
>address, what's the MAC address should input in the access list? is it still
>0080c8.123456? or 000113.482c6a ?
>
>thanks in advance.
>
>Best regard
>Jason
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:53 GMT-3