From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Sat Oct 16 1999 - 11:12:47 GMT-3
Mike,
I don't think appletalk has some thing like ip ospf demand-circuit. WHat u
can do is to use no appletalk send-rtmps at bri0. This will prevent rtmp
from triggering the isdn line. Then configure floating static. ONe thing
troublesome is that there isn't any default route in appletalk. So u might
have to configure a few static routes.
Hope this helps. Have fun :)
Eng Wee
At 00:47 16/10/99 -0400, Mike Wang wrote:
>Hi,
>
>I have configured an appletalk ISDN dial backup scenario. However, I do not
>want periodic rtmp updates send over the ISDN link when the topology is
>stable, only primary link is down that will triger the backup link. In
>other words, I like to achieve "ip ospf demand-circuit" kind result in
>appletalk, any help I appreciate.
>
>Thanks,
>Mike
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:53 GMT-3