From: Antonio Sabella (Antonio.Sabella@xxxxxxxxxxx)
Date: Fri Oct 15 1999 - 22:09:15 GMT-3
I trying to do password recovery on 2500 and 2600 level routers. I'm
telnetting to a terminal sever, then accessing the routers via the terminal
server. When I issue a "control break" sequence, nothing happens. Anyone have
any ideas.
Thanks,
8 days left
Antonio
---------------------- Forwarded by Antonio Sabella/USC/AXE on 10/15/99 08:09
PM ---------------------------
nobody@groupstudy.com on 10/13/99 01:50:51 AM
To: mike_wang51@hotmail.com@internet@WTAXE,
ccielab@groupstudy.com@internet@WTAXE
cc:
Subject: Re: Password recovery
The Hyperterminal came with NT4 is a pretty low version. Go to
http://www.hilgraeve.com/htpe/index.html download private version 4 or 5,
you should be ok.
Zhen Cai
----- Original Message -----
From: Mike Wang <mike_wang51@hotmail.com>
To: <ccielab@groupstudy.com>
Cc: <mike_wang51@hotmail.com>
Sent: Tuesday, October 12, 1999 10:59 PM
Subject: Password recovery
> Hi,
>
> I am practicing password recovery at home. I have both NT4.0 server and
> workstation, I tried Ctrl-Break doesn't work with NT's Hyperterminal.
Could
> anyone tell me what the break key is under NT? THanks a lot,
>
> Mike
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:53 GMT-3