From: Schmitt, Gregory (Gregory.Schmitt@xxxxxxxxxx)
Date: Mon Oct 11 1999 - 19:42:08 GMT-3
Denny,
I am assuming that what you really want here is to show that you are not
using the pvc between the spokes, even though it is configured on the
switch, and available to the spokes.
If you use a subinterface on the spokes, the subinterface (with a network
address) can be connected to the desired dlci with a 'fram interface-dlci
xxx' statement. The extra (undesired) pvc will connect to the physical
interface (without a network address) with inverse arp, but will not be
used.
Or you can go with physical interfaces on the spokes and use 'fram map'
statements specifying the desired dlci. Using frame maps disables inverse
arp on the interface for the protocol
Either way, although the dlci between the spokes shows up on the spokes when
you do a 'sh fram pvc', you are not USING that pvc as proven when you look
at the 'sh fram map' statement.
Does that help?
Greg Schmitt
Network Technology Consultant
COMPAQ Federal LLC
6406 Ivy Lane
Greenbelt, MD 20770
Voice: 410-349-9772
Pager: 800-759-8888 PIN 1232801
Or http://www.skytel.com/Paging/pageme.cgi?pin=1232801,1
> ----------
> From: Denton Bobeldyk[SMTP:denny@kentwoodps.org]
> Reply To: Denton Bobeldyk
> Sent: Monday, October 11, 1999 2:58 PM
> To: groupstudy
> Subject: Frame-relay -> not using certain DLCI's
>
> Hello all,
> quick question:
>
> If I have a frame-relay switch providing spoke routers A and C with
> a separate DLCI to hub router B. And I am also providing them with a
> DLCI directly from A to C - but I don't want them to use that DCLI.
>
> I disabled inverse arp on each of the spokes with 'no frame-relay
> inverse-arp'
> and then they only use the dlci that's connecting them through the
> spoke.
>
> Is there any other way to do this using the major interface? Perhaps if
> I was told that I couldn't
> disable inverse-arp, or is this the only way?
>
> Thanks!!!
>
> 2 days to go!!!!!!
>
> -Denny
>
>
> -*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
> Denton Bobeldyk MCNE, CCDA, CCNA, CCSI
> Email: denny@kentwoodps.org
> Phone: 616-530-9196
>
> Master CNE - Connectivity
> Cisco Certified Design Associate
> Cisco Certified Network Associate
> Cisco Certified Systems Instructor
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:52 GMT-3