From: Richardson, Cheryl (cheryl.richardson@xxxxxxxx)
Date: Fri Sep 17 1999 - 11:09:59 GMT-3
Have you tried specifying the mask on the network command..
network 10.1.1.0 mask 255.255.255.0
It must match what the routing table entry looks like.
Cheryl Richardson
> -----Original Message-----
> From: Jason Aarons [SMTP:jaarons@hotmail.com]
> Sent: Friday, September 17, 1999 9:05 AM
> To: ccielab@groupstudy.com
> Subject: BGP: network x.x.x.x where x.x.x.x is a loopback fails
>
> hostname R1
> !
> interface Loopback0
> ip address 10.1.1.1 255.255.255.0
> !
> router bgp 100
> network 10.1.1.0
> neighbor 192.168.1.1 remote-as 200
> no auto-summary
>
> R1#show ip bgp
> <empty>
>
> Anyone having luck with getting a loopback into BGP table using 'network"
> command ? If I do a 'redistribute connected' it appears but them I have
> to
> filter (route-map) etc.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3