Re: BGP: network x.x.x.x where x.x.x.x is a loopback fails

From: Bill Wade (wwade@xxxxxxxxx)
Date: Fri Sep 17 1999 - 10:31:18 GMT-3

• Next message: Richardson, Cheryl: "RE: network x.x.x.x where x.x.x.x is a loopback fails"
• Previous message: Jason Aarons: "BGP: network x.x.x.x where x.x.x.x is a loopback fails"
• Maybe in reply to: Jason Aarons: "BGP: network x.x.x.x where x.x.x.x is a loopback fails"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Jason,

BGP is assuming an 8 bit mask for 10.x.x.x. Use

         network 10.1.1.0 mask 255.255.255.0

Bill

At 09:04 AM 9/17/99 , Jason Aarons wrote:
>hostname R1
>!
>interface Loopback0
>ip address 10.1.1.1 255.255.255.0
>!
>router bgp 100
>network 10.1.1.0
>neighbor 192.168.1.1 remote-as 200
>no auto-summary
>
>R1#show ip bgp
><empty>
>
>Anyone having luck with getting a loopback into BGP table using 'network"
>command ? If I do a 'redistribute connected' it appears but them I have to
>filter (route-map) etc.
>

• Next message: Richardson, Cheryl: "RE: network x.x.x.x where x.x.x.x is a loopback fails"
• Previous message: Jason Aarons: "BGP: network x.x.x.x where x.x.x.x is a loopback fails"
• Maybe in reply to: Jason Aarons: "BGP: network x.x.x.x where x.x.x.x is a loopback fails"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3