Trouble with apple DDR

From: Edward Taggart (etaggart@xxxxxxxxx)
Date: Mon Sep 13 1999 - 00:46:18 GMT-3


   
   I'm trying to configure apple DDR over to async modems. I've had no
   problems with IP and IPX, but i'm getting encapsulation failed
   messages when trying to send appletalk over my ddr link. I'm
   stumped... R3 is setup to call R5. Here are some snippets from the
   configs...
   
   R3
   ====
   interface Async1
    ip address 132.4.9.3 255.255.255.0
    encapsulation ppp
    bandwidth 19200
    dialer in-band
    dialer map ipx 35.0005.0005.0005 name R5 modem-script dial broadcast
   6427891
    dialer map ip 132.4.9.5 name R5 modem-script dial broadcast 6427891
    dialer map appletalk 35.5 name R5 modem-script dial broadcast 6427891
    dialer-group 1
    async dynamic routing
    async mode dedicated
    appletalk cable-range 35-35 35.3
    appletalk zone 35
    ipx network 35
    no ipx route-cache
    ipx watchdog-spoof
    ppp chap hostname R3
   !
   dialer-list 1 protocol ip permit
   dialer-list 1 protocol ipx list 901
   dialer-list 1 protocol appletalk permit
   
   
   R5
   ===
   interface Async1
    ip address 132.4.9.5 255.255.255.0
    encapsulation ppp
    dialer in-band
    dialer map ip 132.4.9.3 name R3 broadcast
    dialer map appletalk 35.3 name R3 broadcast
    dialer map ipx 35.0003.0003.0003 name R3 broadcast
    dialer-group 1
    async dynamic routing
    async mode dedicated
    appletalk cable-range 35-35 35.5
    appletalk zone 35
    ipx network 35
    ppp authentication chap
    ppp chap hostname R5
   !
   dialer-list 1 protocol ip permit
   dialer-list 1 protocol ipx list 901
   dialer-list 1 protocol appletalk permit
   
   Here's some debug info:
   R3#sho dialer
   
   Async1 - dialer type = IN-BAND ASYNC NO-PARITY
   Idle timer (120 secs), Fast idle timer (20 secs)
   Wait for carrier (30 secs), Re-enable (15 secs)
   Dialer state is data link layer up
   Dial reason: appletalk (s=35.3, d=0.255)
   Time until disconnect 118 secs
   Connected to 6427891
   
   Dial String Successes Failures Last called Last status
   6427891 1 0 never
   
   R3#sho apple nei
   AppleTalk neighbors:
     431.4 Serial0.1, uptime 00:57:22, 2 secs
           Neighbor is reachable as a RTMP peer
   R3#sho apple route
   Codes: R - RTMP derived, E - EIGRP derived, C - connected, A - AURP
          S - static P - proxy
   2 routes in internet
   
   The first zone listed for each entry is its default (primary) zone.
   
   C Net 35-35 directly connected, Async1, zone 35
   C Net 431-432 directly connected, Serial0.1, zone frame
   
   R3#debug apple packet int as 1
   AppleTalk packets debugging is on for interface Async1
   R3#ping apple 35.5
   
   Type escape sequence to abort.
   Sending 5, 100-byte AppleTalk Echos to 35.5, timeout is 2 seconds:
   
   00:59:51: Async1: encapsulation failed AT packet: enctype PPP, size 29
   00:59:51:
   2052544D5020706B742073656E740A301841812B|001DA6E100000023FF03010101002
   30803
   00:59:51:
   00238000238201AF8001B082530002000000010002002B000000040002002500000431
   0001
   00:59:51: Async1: input AT packet: enctype PPP, size 29
   00:59:51:
   2052544D5020706B742073656E740A301841812B|001DA6E100000023FF03010101002
   30803
   00:59:51:
   00238000238201AF8001B082530002000000010002002B000000040002002500000431
   0001
   00:59:53: Async1: encapsulation failed AT packet: enctype PPP, size
   100
   00:59:53:
   00000000000000000000000000000000FCF10309|0064EE4500230023050304FD04010
   00011
   00:59:53:
   D1000000000036D3340000000000000000000000000000000000000000000000000000
   0000
   00:59:53: Async1: input AT packet: enctype PPP, size 100
   00:59:53:
   00000000000000000000000000000000FCF10309|0064EE4500230023050304FD04010
   00011
   00:59:53:
   D1000000000036D3340000000000000000000000000000000000000000000000000000
   0000E
   00:59:55: Async1: encapsulation failed AT packet: enctype PPP, size
   100
   00:59:55:
   0000000000000000000000000000000018418137|0064EE4C00230023050304FD04010
   00011
   00:59:55:
   D2000000000036DB040000000000000000000000000000000000000000000000000000
   0000
   00:59:55: Async1: input AT packet: enctype PPP, size 100
   00:59:55:
   0000000000000000000000000000000018418137|0064EE4C00230023050304FD04010
   00011
   00:59:55:
   D2000000000036DB040000000000000000000000000000000000000000000000000000
   0000E
   00:59:57: Async1: encapsulation failed AT packet: enctype PPP, size
   100
   00:59:57:
   0000000000000000000000000000000018418137|0064DE5B00230023050304FD04010
   00011
   00:59:57:
   D3000000000036E2D40000000000000000000000000000000000000000000000000000
   0000
   00:59:57: Async1: input AT packet: enctype PPP, size 100
   00:59:57:
   0000000000000000000000000000000018418137|0064DE5B00230023050304FD04010
   00011
   00:59:57:
   D3000000000036E2D40000000000000000000000000000000000000000000000000000
   0000E
   00:59:59: Async1: encapsulation failed AT packet: enctype PPP, size
   100
   00:59:59:
   0000000000000000000000000000000018418137|0064DE6200230023050304FD04010
   00011
   00:59:59:
   D4000000000036EAA40000000000000000000000000000000000000000000000000000
   0000
   00:59:59: Async1: input AT packet: enctype PPP, size 100
   00:59:59:
   0000000000000000000000000000000018418137|0064DE6200230023050304FD04010
   00011
   00:59:59:
   D4000000000036EAA40000000000000000000000000000000000000000000000000000
   0000E
   01:00:01: Async1: encapsulation failed AT packet: enctype PPP, size
   100
   01:00:01:
   0000000000000000000000000000000018410800|00641E6A00230023050304FD04010
   00011
   01:00:01:
   D5000000000036F27C0000000000000000000000000000000000000000000000000000
   0000
   
   This seems pretty straight forward and I've done this on ISDN before
   without a problem. Any help would be appreciated.
   
   Thanks! - Ed
   Edward C. Taggart
   etaggart@pivot.net
   http://wwp.icq.com/2034197
   ICQ#:2034197
   AIM:etaggart2



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3