FRTS

From: Edward Taggart (etaggart@xxxxxxxxx)
Date: Mon Sep 06 1999 - 00:43:58 GMT-3

Next message: Chad Marsh: "ANEW II"
Previous message: Jason Aarons: "ATM: RFC 1577 Classical IP"
Next in thread: GRIZZUTI Javier: "RE: FRTS"
Maybe reply: GRIZZUTI Javier: "RE: FRTS"
Maybe reply: Edward Taggart: "Re: FRTS"
Maybe reply: Edward Taggart: "Re: FRTS"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   OK, here goes. I'm trying to configure FRTS with the following
   parameters:

   cir = 48k, burstable to 64k. Mincir = 16k. Tc = 125ms.

   Here is my config:

   interface Serial0
    ...
    frame-relay traffic-shaping
    frame-relay class CCIE

   map-class frame-relay CCIE
    frame-relay cir 48000
    frame-relay bc 6000
    frame-relay be 22000
    frame-relay mincir 16000
    frame-relay adaptive-shaping becn

   Router#sho traffic
               Access Target Byte Sustain Excess Interval
   Increment Adapt
   I/F List Rate Limit bits/int bits/int (ms)
   (bytes) Active
   Se0 48000 3500 6000 22000 125
   750 BECN
   Se0 48000 3500 6000 22000 125
   750 BEC

   Is this correct given my desired goal???

   Edward C. Taggart
   etaggart@pivot.net
   http://wwp.icq.com/2034197
   ICQ#:2034197
   AIM:etaggart2

Next message: Chad Marsh: "ANEW II"
Previous message: Jason Aarons: "ATM: RFC 1577 Classical IP"
Next in thread: GRIZZUTI Javier: "RE: FRTS"
Maybe reply: GRIZZUTI Javier: "RE: FRTS"
Maybe reply: Edward Taggart: "Re: FRTS"
Maybe reply: Edward Taggart: "Re: FRTS"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:50 GMT-3