From: Alex Dean (Alex.Dean@xxxxxxxxxxxxx)
Date: Sun Aug 22 1999 - 20:50:49 GMT-3
Your first option is correct.
The format of the statement on a frame relay switch is, under interface mode:
frame-relay route <local-dlci> interface serial <no. to switch to> <remote-dlci
>
Put this on both interfaces. And remember the global command for the switch on
ly: frame-relay switching
Whether you use sub-interfaces or not at the DTE end is irrelevant to the switc
h.
Cheers
Alex.
>>> "grcitynet" <gr@citynet.net> 23/08/99 11:04:10 >>>
When configuring a router to be a frame-relay switch which is the proper frame-
relay
route statement. Assuming the router atached to int s0 is using subinterfaces
s0.1 dlci 102 and s0.2 dlci 103.
Would it be
frame-relay route 201 int s0 102
frame-relay route 301 int s0 103
OR
frame-relay route 201 int s0.1 102
frame-relay route 301 int s0.2 103
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:47 GMT-3