From: Alex Dean (Alex.Dean@xxxxxxxxxxxxx)
Date: Sat Aug 07 1999 - 19:39:13 GMT-3
Hi
Does anyone have a sample configuration for PPP over async lines?
I am connecting a 2600 router to a 2500 router with a standard Cisco console ca
ble between the two auxilary ports. For the 2600 I am configuring:
line async 65
and for the 2500:
line async 1
And am using the commands at both ends:
ip address x.x.x.x 255.255.0.0
encapsulation ppp
async default routing
async mode dedicated
I cannot get the line protocol to come up for this.
Any help anyone can give would be greatly appreciated. Thanks heaps in advance
for your help.
Cheers
Alex
Alex Dean
Technical Consultant
Distributed Systems Design
Telecom Systems
........................................................
Ext: 93545
DDI: (64 9) 375 6545
Mob: (64 25) 292 1674
Fax: (64 9) 377 1853
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3