From: Jason Aarons (jaarons@xxxxxxxxxxx)
Date: Thu Aug 05 1999 - 10:01:26 GMT-3
Pamela was right, Serial2/2 202 wasn't up/up physically!
----Original Message Follows----
From: Pamela Forsyth <pforsyth@clark.net>
To: Jinho Hong <sthong@ascend.co.jp>
Jinho, Jason,
LMI-type was fine as it Jason configured it originally. The fact that
S0.1 was up,up with an active PVC and S0.2 was down,down with an inactive
PVC told us that. He couldn't have gotten S0.1 working if the LMI-type
had been misconfigured.
Jason, based on my experience you need another frame-relay DTE on the
other end of your PVC with DLCI 204. As soon as S2/2 on your switch is
properly configured as frame-relay DTE and is brought up you will see the
switch answering the LMI queries on DLCI 204.
Pamela
On Thu, 5 Aug 1999, Jinho Hong wrote:
> Hi,
>
> Please refered inline.
>
> Regards,
> Jinho Hong
> -----Original Message-----
> $B:9=P?M(B : Jason Aarons <jaarons@hotmail.com>
> $B08@h(B : ccielab@groupstudy.com <ccielab@groupstudy.com>
> $BF|;~(B : 1999$BG/(B 8$B7n(B 5$BF|(B $BLZMKF|(B $B8a8e(B
12:27
> $B7oL>(B : frame-relay
>
>
> >On Router "2" I have two FR DLCI to other locations via the same cable.
> Why
> >does s0.2 show down/line protocol down ? Does the fr-switch need
> >sub-interfaces ?
> >
> >
> >hostname fr-switch
> >!
> >interface Serial2/1
> >no ip address
> >encapsulation frame-relay
> >clockrate 148000
> frame-relay lmi-type ansi <- It is must need.
> >frame-relay intf-type dce
> >frame-relay route 201 interface Serial2/0 101
> >frame-relay route 204 interface Serial2/2 202
> >
> >2#show fr pvc
> >PVC Statistics for interface Serial0 (Frame Relay DTE)
> >DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0.1
> > input pkts 83 output pkts 271 in bytes 6160
> > out bytes 21479 dropped pkts 2 in FECN pkts 0
> > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > in DE pkts 0 out DE pkts 0
> > out bcast pkts 270 out bcast bytes 21411
> > pvc create time 00:15:49, last time pvc status changed 00:00:17
> >
> >DLCI = 204, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
> Serial0.2
> > input pkts 0 output pkts 14 in bytes 0
> > out bytes 1559 dropped pkts 0 in FECN pkts 0
> > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > in DE pkts 0 out DE pkts 0
> > out bcast pkts 14 out bcast bytes 1559
> > pvc create time 00:15:50, last time pvc status changed 00:00:07
> >2#show int s0.1
> >Serial0.1 is up, line protocol is up
> > Hardware is HD64570
> > Internet address is 172.16.254.2/30
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > reliability 255/255, txload 1/255, rxload 1/255
> > Encapsulation FRAME-RELAY
> >2#show int s0.2
> >Serial0.2 is down, line protocol is down
> > Hardware is HD64570
> > Internet address is 172.16.253.2/30
> > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > reliability 255/255, txload 1/255, rxload 1/255
> > Encapsulation FRAME-RELAY
> >
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3