From: Pamela Forsyth (pforsyth@xxxxxxxxx)
Date: Thu Aug 05 1999 - 09:02:17 GMT-3
Oops. I meant to say, as soon as S2/2 of the switch is properly
configured as frame-relay _DCE_. Insufficient caffeine in the hotel
coffee, I'm afraid. ;-)
Pamela
On Thu, 5 Aug 1999, Pamela Forsyth wrote:
> Jinho, Jason,
>
> LMI-type was fine as it Jason configured it originally. The fact that
> S0.1 was up,up with an active PVC and S0.2 was down,down with an inactive
> PVC told us that. He couldn't have gotten S0.1 working if the LMI-type
> had been misconfigured.
>
> Jason, based on my experience you need another frame-relay DTE on the
> other end of your PVC with DLCI 204. As soon as S2/2 on your switch is
> properly configured as frame-relay DTE and is brought up you will see the
> switch answering the LMI queries on DLCI 204.
>
> Pamela
>
> On Thu, 5 Aug 1999, Jinho Hong wrote:
>
> > Hi,
> >
> > Please refered inline.
> >
> > Regards,
> > Jinho Hong
> > -----Original Message-----
> > $B:9=P?M(B : Jason Aarons <jaarons@hotmail.com>
> > $B08@h(B : ccielab@groupstudy.com <ccielab@groupstudy.com>
> > $BF|;~(B : 1999$BG/(B 8$B7n(B 5$BF|(B $BLZMKF|(B $B8a8e(B 12:27
> > $B7oL>(B : frame-relay
> >
> >
> > >On Router "2" I have two FR DLCI to other locations via the same cable.
> > Why
> > >does s0.2 show down/line protocol down ? Does the fr-switch need
> > >sub-interfaces ?
> > >
> > >
> > >hostname fr-switch
> > >!
> > >interface Serial2/1
> > >no ip address
> > >encapsulation frame-relay
> > >clockrate 148000
> > frame-relay lmi-type ansi <- It is must need.
> > >frame-relay intf-type dce
> > >frame-relay route 201 interface Serial2/0 101
> > >frame-relay route 204 interface Serial2/2 202
> > >
> > >2#show fr pvc
> > >PVC Statistics for interface Serial0 (Frame Relay DTE)
> > >DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.1
> > > input pkts 83 output pkts 271 in bytes 6160
> > > out bytes 21479 dropped pkts 2 in FECN pkts 0
> > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > > in DE pkts 0 out DE pkts 0
> > > out bcast pkts 270 out bcast bytes 21411
> > > pvc create time 00:15:49, last time pvc status changed 00:00:17
> > >
> > >DLCI = 204, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
> > Serial0.2
> > > input pkts 0 output pkts 14 in bytes 0
> > > out bytes 1559 dropped pkts 0 in FECN pkts 0
> > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0
> > > in DE pkts 0 out DE pkts 0
> > > out bcast pkts 14 out bcast bytes 1559
> > > pvc create time 00:15:50, last time pvc status changed 00:00:07
> > >2#show int s0.1
> > >Serial0.1 is up, line protocol is up
> > > Hardware is HD64570
> > > Internet address is 172.16.254.2/30
> > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > reliability 255/255, txload 1/255, rxload 1/255
> > > Encapsulation FRAME-RELAY
> > >2#show int s0.2
> > >Serial0.2 is down, line protocol is down
> > > Hardware is HD64570
> > > Internet address is 172.16.253.2/30
> > > MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
> > > reliability 255/255, txload 1/255, rxload 1/255
> > > Encapsulation FRAME-RELAY
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:46 GMT-3