From: John Galt Kupec (kupec@xxxxxxxx)
Date: Fri Jul 09 1999 - 18:19:01 GMT-3
> Ben Rife wrote:
>
> Here's an Appletalk Filter problem for you guys.
>
> 2-2
> zone
> netA1
> 1-1 |
> zone |e0
> netA2-----routerA----------routerB--------netB2
> | zone
> | 4-4
> netB1
> zone
> 3-3
>
> Problem:
>
> Put a filter on routerB so that it only sees routes and zones from
> routerA e0
>
> What is the solution to this? I can get it to work if I put a
> zip-reply-filter on routerA but I can't get it to work with a
> distribute-list in on routerB.
I think my last response doesn't answer your question as asked.
I was reading it to mean "how to I allow devices in netB1 zone,
cable-range 3-3 to see only zone netA1, cable-range 2-2".
So you want the routerB itself to only see netA1, cable-range 2-2?
Seems like the distribute-list in should still work... Did you
try shut/noshut on the interface with the access-list? Are
you using RTMP or EIGRP between routerA and routerB?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:41 GMT-3