Appletalk filtering

From: Ben Rife (brife@xxxxxxxxxx)
Date: Fri Jul 09 1999 - 17:09:10 GMT-3

• Next message: John Galt Kupec: "Re: Book Evaluation request"
• Previous message: Banks, Al: "Book Evaluation request"
• Next in thread: John Galt Kupec: "Re: Appletalk filtering"
• Maybe reply: John Galt Kupec: "Re: Appletalk filtering"
• Maybe reply: John Galt Kupec: "Re: Appletalk filtering"
• Maybe reply: Ben Rife: "Re: Appletalk filtering"
• Maybe reply: Joe Soricelli: "Re: Appletalk filtering"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
   Here's an Appletalk Filter problem for you guys.
   
              2-2
              zone
              netA1
   1-1 |
   zone |e0
   netA2-----routerA----------routerB--------netB2
                                 | zone
                                 | 4-4
                                netB1
                                zone
                                3-3
   
   Problem:
   
   Put a filter on routerB so that it only sees routes and zones from
   routerA e0
   
   What is the solution to this? I can get it to work if I put a
   zip-reply-filter on routerA but I can't get it to work with a
   distribute-list in on routerB.
   
   Any ideas on this?
   
   4 days and stressing...I mean counting....
   
   Benjy Rife
   MCSE, CNE, CCIE Candidate
   brife@bignet.net
   www.bignet.net/~brife

• Next message: John Galt Kupec: "Re: Book Evaluation request"
• Previous message: Banks, Al: "Book Evaluation request"
• Next in thread: John Galt Kupec: "Re: Appletalk filtering"
• Maybe reply: John Galt Kupec: "Re: Appletalk filtering"
• Maybe reply: John Galt Kupec: "Re: Appletalk filtering"
• Maybe reply: Ben Rife: "Re: Appletalk filtering"
• Maybe reply: Joe Soricelli: "Re: Appletalk filtering"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:41 GMT-3