From: Chuah Eng Wee (chuahew@xxxxxxxxxxxxxxx)
Date: Thu Jul 08 1999 - 21:38:27 GMT-3
One of my friend who sat for the test told me that it did came out !!
Since i am totally new to LAT, I just want to try it out. In fact,
everything is possible !! :-(
Rgds
Eng Wee
At 13:24 08/07/99 -0400, Higgins, Andrew wrote:
>This may be a very stupid question, but was there any reason other than
>being required to know "Everything" for the lab that you were trying to
>configure a LAT service that does an autocommand? Is there a list or
>information that I'm not aware of that lists specific things to know how to
>do for the lab? Just wondering...
>
>Thanks,
>
>Andrew
>
>-----Original Message-----
>From: Chuah Eng Wee [mailto:chuahew@cyberway.com.sg]
>Sent: Thursday, July 08, 1999 12:45 AM
>To: ccielab@groupstudy.com
>Subject: Re: LAT protocol translation (solved !!)
>
>
>Hi..
>
>FOund the solution,
>
>at R4, need to enable the service : lat service COOL5 enable
>and also need to set enable password, otherwise connection will be closed.
>
>debug lat event at R5 did show that COOL5 service is rx :)
>
>Rgds
>ENg Wee
>
>At 12:22 PM 7/8/99 +0800, you wrote:
>>Hi...
>>
>>I am very new to LAT. Tried out the simple scenario below but couldn't get
>>it to work. Did I miss out anything ??
>>
>>
>>[R2]--[R5]--[R4]
>>
>>R2 is running strictly TCP/IP.
>>R4 is running strictly LAT and is advertising a LAT service called COOL5.
>>
>>R2
>>------
>>int S1
>> ip address 172.16.25.1 255.255.255.0
>>
>>
>>R5
>>----
>>translate tcp 172.16.25.3 lat COOL5
>>
>>int s0
>> lat enabled
>>int s1
>> ip address 172.16.25.2 255.255.255.0
>>
>>
>>
>>R4
>>----
>>lat service COOL5 autocommand sh protocols
>>int S0
>> lat enabled
>>
>>
>>Output to expect :
>>If i telnet 172.16.25.3, R5 will do a protocol translation to COOL5 and
>>I should see the output of sh ip protocol
>>
>>I do a "sh lat advertised", I saw R4 did advertised the service COOL5.
>>But when I do a "sh lat services" at R5, R5 did not learned any services.
>>As a result, when I do telnet 172.16.25.3 at R2, I got the following output
>>
>>% Learned service LAT error: Name not found
>>[Connection to 172.16.25.3 closed by foreign host]
>>
>>Any help greatly appreciated. Also, can anyone point me to sites where
>there
>>are more sample config on LAT and protocol translation ??
>>
>>Thanks
>>ENg Wee
>>
>>
>>
>>
>>
>>
>>
>>
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:41 GMT-3