From: Ben Rife (brife@xxxxxxxxxx)
Date: Thu Jul 08 1999 - 15:31:33 GMT-3
Rick and others, I'm trying to troubleshoot why my DLSW peers won't connect
over Frame, I have one working over a multipoint intf, but when I try to
establish a connection from the hub on my point-to-point intf, it won't
connect. Any ideas? I know it should be simple. I removed all access-lists
as well. I'm in a quandry.
Thanks,
----- Original Message -----
From: Rick Burts <burts@ccci.com>
To: Ben Rife <brife@bignet.net>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, July 08, 1999 2:14 PM
Subject: Re: DLSW+
> There are some things you are not specific about in your question,
> for example do you need peering to be any to any or is peering to be
> selective ?
>
> As you describe it and draw it, it looks like a very simple solution
> would work: each router with a DLSW LOCAL-PEER and DLSW REMOTE-PEER for
> the other two routers. You could, of course, do some things with
> promiscuous etc to simplify the configuration. I do not see anything
> in your question that would suggest border peers or anything like that.
>
> Rick
>
> On Thu, 8 Jul 1999, Ben Rife wrote:
>
> > 5 days left!.
> >
> > I have a question about DLSW.
> >
> > What do you need to do to get dlsw working with three routers? Let's say
=
> > you have the following senario:
> >
> > A router with a To0 int connected to a router with an E0 int connected =
> > to a router with a To0 int.
> >
> > ROUTERA --------- ROUTERB ---------- ROUTERC
> > to0 e0 to0
> >
> > Do you have to use border peers in this case? What would this config =
> > look like?
> >
> > Thanks,
> >
> > Benjy Rife
> > MCSE, CNE, CCIE Candidate
> > brife@bignet.net
> > www.bignet.net/~brife
> >
>
> Rick Burts, CCSI CCIE 4615 burts@ccci.com
> Chesapeake Computer Consultants 410-280-8840 ex 3015
> 275 West Street 410-280-8859 fax
> Plaza 70
> Annapolis, Md 21401
>
> Chesapeake is a certified Cisco Training Partner and also
> a Cisco Professional Services partner.
> We offer most of the Cisco training courses.
> We also offer training in Checkpoint Firewall software and
> Fore Systems and NetScout.
> We also provide network consulting services including
> design, management, and problem solving.
> We have 21 CCIEs on our staff.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:41 GMT-3