From: Scott Morris (SMorris@xxxxxxxxxxxxx)
Date: Fri May 14 1999 - 17:06:51 GMT-3
Or switch to IPX EIGRP. :)
-----Original Message-----
From: Joe Soricelli [mailto:jsoricelli@ccci.com]
Sent: Friday, May 14, 1999 2:56 PM
To: ccielab@groupstudy.com
Subject: Re: IPX over Frame Relay
Tunnels!!
Setup one from each spoke to the hub. They will each need a different IPX
network number.
-joe
-----Original Message-----
From: Ben Rife < brife@bignet.net <mailto:brife@bignet.net> >
To: ccielab@groupstudy.com <mailto:ccielab@groupstudy.com> <
ccielab@groupstudy.com <mailto:ccielab@groupstudy.com> >
Date: Friday, May 14, 1999 1:21 PM
Subject: IPX over Frame Relay
Hi Everyone,
Two months from today is the big day in RTP!
Question: In my lab, I have a partial mesh Frame Relay setup. I understand
that you can not disable split-horizon for IPX/RIP on the Hub router to
avoid issues with split-horizon. What are my options to route traffic
between my spokes, other than eigrp, or static/default routes?
Regards,
Benjy Rife
MCSE, CNE, CCIE Candidate
brife@bignet.net <mailto:brife@bignet.net>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:37 GMT-3