From: Joe Soricelli (jsoricelli@xxxxxxxx)
Date: Wed Apr 21 1999 - 14:59:40 GMT-3
I've not sat the lab yet (June 14), but my gut tells me that there will most
likely be LANE blades in your Catalysts in your pod. These would connect to
a central ATM switch controlled by the proctor. You will then need to
configure ELANs and VLANs across the ATM cloud between the Catalysts. If
you've been through the CLSC course, you should be good with this.
-joe
-----Original Message-----
From: Stanley Seow <stanley@silicon.net.my>
To: Khalid.Khan@gecits-eu.com <Khalid.Khan@gecits-eu.com>;
ccielab@groupstudy.com <ccielab@groupstudy.com>
Date: Wednesday, April 21, 1999 2:59 AM
Subject: RE: Preparation
>Any idea what is the objective of the ATM included for June labs ?
>Are those the 5500 ATM module / LS1010 - ( LECS, BUS, LEC, VLAN, ELAN ) ?
>
>I m kinda worried about the ATM part actually.
>
>Stanley
>
>> I intended to take my lab week starting 14/6/99 in Brussels.
>> I know this
>> may seem a very open ended question but any tips on how to
>> prepare apart
>> from
>> make sure you know everything about everything.
>> I have been trying to get as much hands on and doing a lot of mock
>> scenarios but
>> get very overwhelmed with the vast subject matter since they are now
>> introducing ATM.
>> Over the next few weeks I have mapped out plan of what to
>> study and when
>> but sticking to
>> it difficut.
>>
>> Any comments?
>>
>>
>>
>> Khalid Khan
>> GE Capital IT Solutions
>>
>>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:21:36 GMT-3